AL19RG.HD fireplace insert – right-hand model with guillotine

AL19RG.HD fireplace insert from the ALBERO series is a steel corner model with a nominal power of 19 kW, equipped with a panoramic front glass, right-side glazing, and a vertically lifting door. A two-sided fire view allows you to observe the flames from different parts of the room, while a guillotine mechanism provides convenient access to the combustion chamber.

The heating load ranges from 9.5 to 24 kW. This allows the unit's operating intensity to be adjusted to current heating requirements. Furthermore, an external air intake and a secondary air supply system support stable wood combustion.

The model is one of the popular ones ALBERO fireplace insert seriesThe line offers various glazing options, while also allowing for the personalization of the handle, grilles, and combustion chamber lining.

Corner fireplace insert with right side glass

ALBERO AL19RG.HD is equipped with side glazing on the right sideCombined with the panoramic front glass, it creates a corner view of the fire that opens the fire to a larger part of the room.

This arrangement is particularly effective when the lounge, dining area, or other part of the interior is located on the right side of the structure. This allows the flames to be visible both directly in front of the fireplace and from its right side.

A corner structure can also be used in a built-in space placed between two functional zones. As a result, the fireplace can visually connect the individual sections of an open-plan living space.

Vertically lifting guillotine type doors

The AL19RG.HD insert is equipped with guillotine-type door lifting mechanismWhen adding wood, the corner glazing is lifted vertically, providing convenient access to the combustion chamber.

The door doesn't protrude from the building surface like a traditional door. This makes the space directly in front of the fireplace easier to manage.

The lifting mechanism should be considered at the design stage of the enclosure. The design must not restrict door movement or impede access to components requiring periodic inspection or maintenance.

Panoramic glazing 900 × 415 × 375 mm

The glazing dimensions of the AL19RG.HD model are 900 × 415 × 375 mmThe wide front glass and right side glazing allow for good exposure of the combustion chamber and provide a comprehensive view of the flames.

The large glass surface allows the insert to serve not only as an additional heat source but also as a central element of the living room design. At the same time, the simple frame design blends well with both minimalist and more decorative designs.

Before beginning installation, please consult the current technical drawing. This allows you to correctly consider the glass position, the full dimensions of the device, and the space required for the guillotine mechanism.

Right-sided fireplace insert for various arrangements

The choice of right- or left-hand version should be based on the room's layout and the direction from which the fire will be most frequently viewed. The AL19RG.HD model is designed for arrangements where the side view of the fire should face to the right.

This solution can be effective when the unit is placed against a wall, on the border between the living room and dining room, or near a passageway. Furthermore, corner glazing visually opens the unit to a larger portion of the interior.

The orientation of the device should be determined before the casing is constructed. This allows for proper planning of the side glass position, access to the combustion chamber, and the arrangement of other installation components.

Heat-resistant ceramic glass

The AL19RG.HD model uses heat-resistant ceramic glass suitable for operation at temperatures up to 800°CThe material retains its properties during proper use of the device and allows for safe observation of the fire.

The combination of the panoramic front glass and the right-hand side glass provides a comprehensive view of the fire. As a result, the flames can be clearly seen from several locations in the room.

Glass should be cleaned according to the instructions in the user manual. Do not use any cleaning agents or tools that could damage the glass surface or the door seal.

Steel doors with a stable structure

The insert door is made of special steel profile, which ensures appropriate stiffness and resistance to high temperatures.

A stable structure is particularly important for large, vertically raised corner glazing. It supports proper door alignment and seal adhesion during regular use.

At the same time, the simple form of the frame limits the number of visible structural elements. This allows the fireplace to remain the most important part of the fireplace.

A system that helps keep windows clean

The AL19RG.HD fireplace insert is equipped with an air curtain that helps maintain the clean glass effectThe airflow directed along the inner surface of the glazing helps reduce the build-up of soot and other contaminants.

This allows the front and side windows to remain clear for longer periods of time. However, the system does not eliminate the need for periodic cleaning.

The degree of glass contamination is also influenced by wood moisture content, fuel quality, chimney draft parameters, lighting method, and air supply settings. Therefore, the appliance should be used in accordance with the manufacturer's instructions.

Power of the AL19RG.HD fireplace insert

The nominal power of the AL19RG.HD fireplace insert is 19 kWThe heating load ranges from 9.5 to 24 kW, allowing you to adjust the device's operating intensity to your current heat demand.

The selection of the insert should take into account, among other things, the cubic capacity of the rooms, the insulation of the building, the layout of the heated zones and the parameters of the chimney flue.

Therefore, choosing a device of this power should be consulted with a qualified installer. This reduces the risk of using an insert that is inappropriate for the conditions in a specific building.

Thermal efficiency at the level of 81%

The thermal efficiency of the AL19RG.HD model is 81%A properly designed air supply system supports stable combustion and the utilization of the energy contained in the wood.

The specially designed rear section of the body allows secondary air to be supplied to the upper part of the combustion chamber, thus supporting the combustion of gases generated during fuel combustion.

As a result, the combustion process can be more precise. However, achieving the declared parameters requires proper installation, proper chimney draft, and the use of properly seasoned wood.

Emission parameters of the AL19RG.HD model

Pollen emissions at 13% O₂ totals 29 mg/m³. In turn, CO emissions at 13% O₂ totals 1200 mg/m³.

The declared values refer to specific device testing conditions. In an actual installation, combustion is influenced by factors such as wood quality, chimney draft, ignition method, and air supply regulation.

Therefore, use dry, properly seasoned wood and the amount of fuel specified in the user manual. This will reduce the risk of improper combustion and excessive contamination.

External air intake

The steel base of the insert is equipped with external air intake damperThe air needed for combustion can thus be supplied directly from outside the building.

This solution reduces the need to draw air exclusively from the heated room. This is particularly important in modern buildings characterized by high airtightness.

The diameter of the intake port is 150 mmThe duct must be designed to ensure the free flow of the required amount of air into the combustion chamber.

Fireplace insert adapted for recuperation

The AL19RG.HD model is adapted for use in buildings equipped with heat recoveryThe external air intake helps reduce the impact of the fireplace on the air balance inside the room.

At the same time, the fireplace installation and mechanical ventilation should be properly designed and adjusted. This will ensure proper operating conditions for both systems.

It's important to determine the air intake method before beginning construction. This helps avoid conflicts with other installations and properly prepare the air duct route.

Flue with a diameter of 220 mm

The diameter of the flue of the ALBERO AL19RG.HD insert is 220 mmThe chimney and exhaust connection must be adapted to the parameters of the appliance.

Before starting the installation, check, among other things, the cross-section and height of the chimney, the available draft, the method of connection and the possibility of performing periodic inspections and cleaning of the installation.

The final assessment of the connection conditions should be carried out by a qualified installer or a person with appropriate chimney qualifications.

Ventilated insert housing AL19RG.HD

Model AL19RG.HD it is not intended for the construction of warm buildingsThe enclosure should therefore be designed as an appropriately ventilated structure, in accordance with the device instructions and thermal protection requirements.

Air inlets and outlets should allow for free flow around the insert body. This allows heated air to be transferred to the room while protecting the built-in components from excessive temperature rise.

The enclosure should be constructed using materials designed for use in elevated temperatures. The structure should also provide access to components requiring inspection or service.

Required active fields of the grids

The active area of the outlet grilles should be from 1330 to 1520 cm². However, the required active area of the inlet grilles is in the range of 760 to 1240 cm².

When selecting grilles, consider their actual active area, not just the external dimensions of the frame. Slats, mesh, and other structural elements limit the area available for airflow.

The intake vents draw cooler air into the space around the body. The heated air then moves upward and is expelled through the exhaust vents.

Construction adapted to the guillotine mechanism

When designing the enclosure, ensure that there is sufficient space for the vertical lifting of corner doors. The design must not restrict the movement of the mechanism or cause stress on the device's components.

Furthermore, access to parts requiring inspection and service must be maintained. Consideration must also be given to the space required for connecting the flue pipe, providing air intake, and venting.

The design and installation of the installation should be entrusted to a qualified installer who will take into account the current documentation of the device and the conditions existing in the specific building.

P265GH boiler steel body

The insert casing is made of P265GH grade boiler steel in accordance with EN 10028-2This material is intended for applications requiring operation at elevated temperatures.

The steel construction ensures the stability of the entire device. Furthermore, the carefully selected material ensures the insert's durability during regular use.

Proper operating conditions also depend on the installation and construction method. Therefore, all work should be carried out in accordance with the current product documentation.

Personalization of the ALBERO AL19RG.HD insert

The ALBERO series allows you to match selected elements of the device to the character of the building and interior. Customization options include the handle, grilles, and black concrete fireplace lining.

The insert can be ordered from black powder-coated door handleThis gives the front a more uniform appearance and allows it to blend in better with dark furnishings.

The black lining of the combustion chamber creates a cohesive composition with the insert frame and highlights the color of the flames. This allows the device's appearance to be adapted to the specific design of the living room.

Dimensions of the AL19RG.HD fireplace insert

The dimensions of the device are 1124 × 1324 × 655 mmThe corner design and door lifting mechanism should be carefully considered when designing the enclosure and preparing connections.

The weight of the insert is 275 kgThe substrate should therefore have adequate load-bearing capacity and be prepared in accordance with the requirements for the installation of solid fuel heating devices.

Before constructing the enclosure, use a current technical drawing. This allows you to properly plan the device's location, flue connection, intake manifold, and ventilation opening layout.

Energy efficiency class A+

The AL19RG.HD fireplace insert has energy efficiency class A+81% thermal efficiency and a secondary air supply system support the use of energy contained in the wood.

However, the actual operating efficiency also depends on the quality of the fuel, the parameters of the chimney, the method of installation and the correct operation of the device.

Compliance with Ecodesign, BImSchV II and 15a B-VG

The ALBERO AL19RG.HD fireplace insert meets the requirements Ekoprojekt, BImSchV II and 15a B-VG.

The requirements for local solid fuel space heaters are specified, among others, by: Commission Regulation (EU) 2015/1185.

According to the manufacturer, this product should not be used as a primary heating source. It should be used as a supplemental heat source, in accordance with its intended use and the device's instructions.

Why choose the AL19RG.HD fireplace insert?

AL19RG.HD fireplace insert It combines a nominal output of 19 kW, panoramic front glazing, right-side glass, and a vertically lifting door. The corner design allows for viewing the flames from most of the room, while the guillotine mechanism provides convenient access to the firebox.

Additionally, the device is equipped with an external air intake, an exhaust afterburner system, and an air curtain to help keep the windows clean. The ability to personalize the handle, grilles, and fireplace insert makes it easy to match the insert to your specific interior design.