AL19S.HD fireplace insert with a power of 19 kW

Fireplace insert AL19S.HD from the ALBERO series is a steel model with a nominal power of 19 kW, equipped with a wide 900 x 415 mm glass panel. The horizontal shape of the glass provides a wide view of the firebox, making the device a perfect fit for wide fireplaces and spacious living areas.

The heating load ranges from 9.5 to 24 kW. This allows the insert's operating intensity to be adjusted to current heating requirements. Furthermore, an external air intake and a secondary air supply system support stable wood combustion.

The model is one of the popular ones ALBERO fireplace insert seriesThe line offers various glazing options and the ability to personalize the handle, covers, and combustion chamber lining.

Wide glazing 900 × 415 mm

The AL19S.HD model is equipped with glass with dimensions of 900 × 415 mmIts horizontal proportions provide a panoramic view of the fire and allow the flames to be clearly displayed.

The wide glazing can become a central element in a living room's design. At the same time, the simple form of the front complements both minimalist built-ins and more elaborate fireplace designs.

Before beginning installation, please consult the current technical drawing. This allows you to correctly consider the full dimensions of the insert, the position of the flue pipe, the inlet port, and the required installation space.

Front fireplace insert for modern interiors

The horizontal glazing makes the AL19S.HD a good fit for wide walls and open areas connecting the living room and dining room. This allows for a clear view of the fire from most of the room.

The simple front also facilitates the creation of a cabinet that matches the character of the interior. The insert can be surrounded by a uniform surface, decorative material, or elements that reflect the rest of the living room furnishings.

However, the final housing design should take into account mounting requirements, ventilation of the space around the body and the possibility of performing periodic inspections of the device.

Heat-resistant ceramic glass

The insert uses heat-resistant ceramic glass suitable for operation at temperatures up to 800°CThe material retains its properties during proper use of the device and allows for safe observation of the fire.

The large glazing area allows for the combustion chamber to be fully exposed. This allows the insert to serve not only as an additional heat source but also as a decorative element of the interior design.

Clean the glass according to the manufacturer's recommendations. Do not use tools or products that could damage the glass surface or door seals.

Steel doors with a stable structure

The insert door is made of special steel profile, which ensures appropriate stiffness and resistance to high temperatures.

The stable structure supports proper door alignment and seal adhesion during regular use. This is particularly important in the case of large, wide glazing.

At the same time, the limited number of visible structural elements means that the most important part of the front remains the fireplace and the view of the flames.

A system that helps keep the glass clean

The AL19S.HD fireplace insert is equipped with an air curtain that helps maintain the clean glass effectThe airflow directed along the inner surface of the glazing helps reduce the build-up of soot and other contaminants.

This allows the firebox view to remain clear for extended periods of time. However, the system does not eliminate the need for periodic glass cleaning.

The degree of glass contamination is also influenced by wood moisture content, fuel quality, chimney draft parameters, lighting method, and air supply adjustment. Therefore, the device should be used in accordance with the manufacturer's instructions.

Power of the AL19S.HD fireplace insert

The nominal power of the AL19S.HD fireplace insert is 19 kWThe heating load ranges from 9.5 to 24 kW, allowing you to adjust the device's operating intensity to the current heat demand.

The selection of the insert should take into account, among other things, the cubic capacity of the rooms, the insulation of the building, the layout of the heated zones and the parameters of the chimney flue.

Therefore, choosing a device of this power should be consulted with a qualified installer. This reduces the risk of using an insert that is inappropriate for the conditions in a specific building.

Thermal efficiency at the level of 81%

The thermal efficiency of the AL19S.HD model is 81%A properly designed air supply system supports stable combustion and the utilization of the energy contained in the wood.

The special design of the rear part of the body allows secondary air to be supplied to the upper part of the combustion chamber, supporting the post-combustion of gases generated during fuel combustion.

As a result, the combustion process can be more precise. However, achieving the declared parameters requires proper installation, adequate chimney draft, and the use of fuel in accordance with the instructions.

Emission parameters of the AL19S.HD model

Pollen emissions at 13% O₂ totals 29 mg/m³. In turn, CO emissions at 13% O₂ totals 1200 mg/m³.

The declared values refer to specific device testing conditions. In an actual installation, combustion is influenced by factors such as wood quality, chimney draft, ignition method, and air supply settings.

Therefore, use dry, properly seasoned wood and the amount of fuel specified in the user manual. This will reduce the risk of improper combustion and excessive contamination.

External air intake

The steel base of the device is equipped with external air intake damperThe air needed for combustion can thus be supplied directly from outside the building.

This solution reduces the need to draw air exclusively from the heated room. This is particularly important in modern, airtight buildings.

The diameter of the intake port is 150 mmThe duct must be designed to ensure the free flow of the required amount of air into the combustion chamber.

Fireplace insert adapted for recuperation

The AL19S.HD model is adapted for use in buildings equipped with heat recoveryThe external air intake helps reduce the impact of the fireplace on the air balance inside the room.

At the same time, the fireplace installation and mechanical ventilation should be properly designed and adjusted to ensure proper operating conditions for both systems.

It's best to determine the air intake method before beginning construction. This helps avoid conflicts with other installations and properly prepare the air duct route.

Flue with a diameter of 220 mm

The diameter of the flue of the ALBERO AL19S.HD insert is 220 mmThe chimney and exhaust connection must be adapted to the parameters of the appliance.

Before installation, check, among other things, the cross-section and height of the chimney, the available draft, the method of connection and the possibility of performing periodic inspections and cleaning of the installation.

The final assessment of the connection conditions should be carried out by a qualified installer or a person with appropriate chimney qualifications.

Ventilated insert housing AL19S.HD

Model AL19S.HD it is not intended for the construction of warm buildingsThe enclosure should therefore be designed as an appropriately ventilated structure, in accordance with the device instructions and thermal protection requirements.

Air inlets and outlets should allow for free flow around the insert body. This allows heated air to be transferred to the room while protecting the housing components from excessive temperature rise.

The construction should be constructed using materials designed for use in elevated temperature conditions. The structure should also provide access to components requiring periodic inspection or maintenance.

Required active fields of the grids

The active area of the outlet grilles should be from 1330 to 1520 cm². However, the required active area of the inlet grilles is in the range of 760 to 1240 cm².

When selecting grilles, it's important to consider their actual active area, not just the external dimensions of the frame. Slats, mesh, and other structural elements limit the area available for airflow.

Intake vents draw cooler air into the space around the body. The heated air then moves upward and is expelled through the exhaust grilles.

P265GH boiler steel body

The insert casing is made of P265GH grade boiler steel in accordance with EN 10028-2This material is intended for applications requiring operation at elevated temperatures.

The steel construction ensures the stability of the entire device. Furthermore, the carefully selected material ensures the insert's durability during regular use.

Proper operating conditions also depend on the installation and construction method. Therefore, all work should be carried out in accordance with the current product documentation.

Personalization of the ALBERO AL19S.HD insert

The ALBERO series allows you to match selected elements of the device to the character of your interior. Customization options include the handle, grilles, and black concrete fireplace insert.

It is possible to order a cartridge with black powder-coated door handleThis gives the front a more uniform appearance and allows it to blend in better with dark furnishings.

The black lining of the combustion chamber creates a cohesive composition with the device's frame and highlights the color of the flames. As a result, the insert's appearance can be adapted to the specific design of the living room.

Dimensions of the AL19S.HD fireplace insert

The dimensions of the device are 997 × 1324 × 512 mmThe width of the insert and its other dimensions should be carefully considered when designing the enclosure and preparing the installation.

The weight of the model is 183 kgThe substrate should therefore have adequate load-bearing capacity and be prepared in accordance with the requirements for the installation of solid fuel heating devices.

Before constructing the enclosure, use a current technical drawing. This allows you to properly plan the device's positioning, the location of the flue pipe, the design of the air intake, and the arrangement of ventilation grilles.

Energy efficiency class A+

The AL19S.HD fireplace insert has energy efficiency class A+81% thermal efficiency and a secondary air supply system support the use of energy contained in the wood.

However, the actual operating efficiency also depends on the quality of the fuel, the parameters of the chimney, the method of installation and the correct operation of the device.

Compliance with Ecodesign, BImSchV II and 15a B-VG

The ALBERO AL19S.HD fireplace insert meets the requirements Ekoprojekt, BImSchV II and 15a B-VG.

The requirements for local solid fuel space heaters are specified, among others, by: Commission Regulation (EU) 2015/1185.

In accordance with Ecodesign requirements, this product cannot be used as a primary heating source. It should be used as a supplementary heat source, in accordance with its intended use and the device's instructions.

Why choose the AL19S.HD fireplace insert?

Fireplace insert AL19S.HD combines a nominal power of 19 kW, a 900 mm wide panoramic glass pane, and an A+ energy efficiency rating. A load range of 9.5 to 24 kW allows you to adjust the device's operating intensity to your current heating needs.

Additionally, the model is equipped with an external air intake, an exhaust afterburner system, and an air curtain to help keep the glass clean. The ability to personalize the handle, grilles, and firebox lining makes it easy to match the insert to your specific interior design.