ALBERO AL16S.H-D

ALBERO AL16S.HD fireplace insert with a power of 16 kW

ALBERO AL16S.HD fireplace insert This is a steel model with a simple front glazing and a nominal power of 16 kW. The wide, horizontally proportioned glass provides a wide view of the fire, making it a perfect choice for spacious living rooms and open-plan living areas.

The heating load ranges from 8 to 20 kW. This allows the insert's operating intensity to be adjusted to current heating requirements. At the same time, the device's design and air supply system support stable and controlled wood combustion.

The model is one of the popular ones ALBERO fireplace insert seriesThe line is distinguished by its modern design, the ability to personalize selected elements, and its adaptation for use in buildings equipped with heat recovery.

Large front glazing

ALBERO AL16S.HD is equipped with front glass with dimensions of 680 × 530 mmIts large surface area allows for good exposure of the fire and provides a clear view of the flames.

The horizontal form of the insert complements wide fireplace enclosures, extensive media walls, and open spaces connecting the living room and dining room. Furthermore, the simple glazing arrangement makes it easy to integrate the device into both minimalist and more decorative interiors.

Before constructing the housing, use a current technical drawing. This allows for the correct consideration of the full dimensions of the device, the location of the flue pipe, the inlet port, and the space required to service the insert.

Heat-resistant ceramic glass up to 800°C

The insert uses heat-resistant ceramic glass suitable for operation at temperatures up to 800°CThe material retains its properties during proper use of the device and allows for safe observation of the fire.

The large glass surface makes the fireplace one of the most important elements of the living room design. As a result, the insert serves not only as an additional heat source but also as a decorative element.

Steel doors with a stable structure

The doors of the AL16S.HD model are made of special steel profileThe design ensures adequate stiffness and resistance to high temperatures.

A stable frame supports proper door alignment and sealing during regular use. At the same time, the simple front design limits the number of visible structural elements, ensuring that the most important part of the fireplace remains the view of the fire.

A system that helps keep the glass clean

The ALBERO AL16S.HD fireplace insert is equipped with an air curtain that helps maintain the clean glass effectThe air flow directed along the inner surface of the glazing helps reduce the build-up of soot and other contaminants.

This allows the flames to remain visible for longer periods of time. However, the system does not eliminate the need for periodic cleaning of the glass.

The degree of glazing contamination is also influenced by wood moisture and quality, lighting method, chimney draft parameters, and air supply settings. Therefore, the appliance should be used in accordance with the manufacturer's instructions.

Nominal power 16 kW

The nominal power of the ALBERO AL16S.HD insert is 16 kWThe heating load ranges from 8 to 20 kW, allowing you to adjust the device's operating intensity to the current heat demand.

The insert can be used as an additional heating source in a larger living room, open-plan living area or other room suitable for installing a wood-burning fireplace.

The power selection should take into account, among other things, the area and volume of the rooms, the building's insulation standard, the interior layout, and the parameters of the chimney flue. Therefore, it is advisable to consult a qualified installer before selecting a device.

Thermal efficiency at the level of 80%

The thermal efficiency of the AL16S.HD model is 80%A properly designed air supply system supports stable combustion and the utilization of the energy contained in the wood.

The specially shaped rear section of the body allows secondary air to be supplied to the upper part of the combustion chamber, thus supporting the combustion of gases generated during fuel combustion.

As a result, the combustion process can proceed more precisely, which helps reduce the products of incomplete combustion and maintain the declared operating parameters of the device.

Emission parameters AL16S.HD

Pollen emissions at 13% O₂ totals 33 mg/m³. In turn, CO emissions at 13% O₂ totals 786 mg/m³.

Obtaining the declared results requires correct installation of the insert, ensuring proper chimney draft and using properly seasoned wood.

Furthermore, the fuel quantity, ignition method, and air supply settings must comply with the requirements contained in the operating instructions. This ensures that the device can operate within the intended heating load range.

External air intake

The steel base of the insert is equipped with external air intake damperThe air needed for combustion can thus be supplied directly from outside the building.

This solution reduces the need to draw air exclusively from the heated room. This is particularly important in modern buildings characterized by high airtightness.

The diameter of the intake port is 125 mmThe duct must be designed to allow the required amount of air to flow freely into the combustion chamber.

Fireplace insert adapted for recuperation

The AL16S.HD model is adapted for use in buildings equipped with heat recoveryThe external air intake helps reduce the impact of the fireplace on the air balance in the room.

At the same time, the fireplace installation and mechanical ventilation should be properly designed and adjusted to ensure proper operating conditions for both systems.

It's best to determine the intake method before beginning construction of the fireplace surround. This helps avoid conflicts with other installations and maintain the required installation distances.

Flue with a diameter of 200 mm

The diameter of the flue of the ALBERO AL16S.HD insert is 200 mmThe chimney and exhaust connection must be adapted to the parameters of the appliance.

Before starting the installation, check, among other things, the cross-section and height of the chimney, the available draft, the method of connection and the possibility of performing periodic inspections and cleaning of the installation.

The final assessment of the connection conditions should be carried out by a qualified installer or a person with appropriate chimney qualifications.

Ventilated insert housing AL16S.HD

Model AL16S.HD it is not intended for the construction of warm buildingsThe enclosure should therefore be designed as an appropriately ventilated structure, in accordance with the device instructions and thermal protection requirements.

The active area of the outlet grilles should be from 1120 to 1280 cm². However, the required active area of the inlet grilles is in the range of 640 to 1040 cm².

Properly placed openings allow air to flow around the body. This allows heat to be efficiently transferred to the room and protects the built-in components from excessive temperature rises.

The meaning of the active field of the grids

When choosing grilles, you should take their actual active field, not just the external dimensions of the frame. Slats, mesh, and other structural elements limit the surface area through which air can flow.

The intake vents draw cooler air into the space around the insert. The heated air then moves upward and is expelled through the exhaust grilles.

Therefore, the type, size and arrangement of the grilles should be taken into account already at the stage of designing the fireplace casing.

P265GH boiler steel body

The insert casing is made of P265GH boiler steel grade compliant with EN 10028-2This material is intended for applications requiring operation at elevated temperatures.

The steel body ensures adequate stability of the entire structure. Furthermore, carefully selected materials ensure the device's durability during regular use.

Personalization of the ALBERO AL16S.HD insert

The ALBERO series allows you to match selected elements of the device to the character of your interior. Customization options include the handle, grilles, and black concrete fireplace insert.

It is possible to order a cartridge with black powder-coated door handleThis allows the front to achieve a more uniform appearance and better blend in with dark furnishings.

The black lining of the combustion chamber creates a cohesive composition with the device's frame and highlights the color of the flames. As a result, the insert's appearance can be adapted to the specific design of the living room.

Dimensions and weight of the AL16S.HD insert

The dimensions of the device are 777 × 1165 × 512 mmThe dimensions of the insert should be carefully considered when designing the installation and preparing the chimney connection and air supply duct.

The weight of the insert is 162 kgTherefore, the substrate should have adequate load-bearing capacity and be prepared in accordance with the requirements for the installation of solid fuel heating devices.

Before constructing the enclosure, use a current technical drawing. This will allow you to properly plan the device's positioning, leveling, and connection to other installation components.

Energy efficiency class A+

The ALBERO AL16S.HD fireplace insert has energy efficiency class A+80% thermal efficiency and a secondary air supply system support the use of energy contained in the wood.

However, the actual efficiency of the device also depends on the quality of the fuel, the parameters of the chimney, the method of installation and the correct operation of the insert.

Compliance with Ecodesign, BImSchV II and 15a B-VG

The ALBERO AL16S.HD fireplace insert meets the requirements Ekoprojekt, BImSchV II and 15a B-VG.

The requirements for local solid fuel space heaters are specified, among others, by: Commission Regulation (EU) 2015/1185.

In accordance with Ecodesign requirements, this product cannot be used as a primary heating source. It should be used as a supplementary heat source, in accordance with its intended use and the device's instructions.

Why choose ALBERO AL16S.HD?

ALBERO AL16S.HD fireplace insert It combines a nominal power of 16 kW, wide front glazing, and an A+ energy efficiency rating. A load range of 8 to 20 kW allows you to adjust the intensity of operation to your current heating needs.

Additionally, the device is equipped with an external air intake, a post-combustion system, and an air curtain to help keep the glass clean. The ability to personalize the handle, grilles, and firebox lining makes it easy to match the insert to your specific interior design.