ALBERO AL19G.HD

AL19G.HD fireplace insert with a 19 kW guillotine

AL19G.HD fireplace insert from the ALBERO series is a steel model with a nominal power of 19 kW, equipped with panoramic glazing and a vertically lifting door. The 900 x 415 mm glass provides a wide view of the fire, while the guillotine mechanism facilitates access to the combustion chamber.

The heating load ranges from 9.5 to 24 kW. This allows the unit's operating intensity to be adjusted to current heating requirements. Furthermore, an external air intake and a secondary air supply system support stable wood combustion.

The model is one of the popular ones ALBERO fireplace insert seriesThe line features a variety of glazing options, customizable appearance, and solutions that support efficient fireplace use.

Panoramic glazing 900 × 415 mm

The AL19G.HD model is equipped with wide front glass measuring 900 × 415 mmIts horizontal proportions provide a panoramic view of the fire and allow the flames to be clearly displayed.

This form complements large fireplaces, wide walls, and open living areas. As a result, the fire can be clearly seen from both the lounge area and the dining room, or anywhere else in the room.

Before beginning installation, please consult the current technical drawing. This allows you to correctly account for the full dimensions of the insert, the position of the flue pipe, the inlet port, and the space required for the door lift mechanism.

Vertically lifting guillotine type doors

The AL19G.HD insert is equipped with vertically lifting guillotine-type doorsWhen adding wood, the wide glass panel lifts up, providing easy access to the combustion chamber.

The door doesn't protrude from the building surface like a traditional door. This makes the space directly in front of the fireplace easier to manage.

The lifting mechanism should be considered at the design stage of the enclosure. The design must not restrict door movement or impede access to components requiring periodic inspection or maintenance.

Front fireplace insert for a spacious living room

The horizontal glazing makes the AL19G.HD a perfect fit for wide spaces and open areas connecting the living room and dining room. Furthermore, the simple front allows the fireplace to fit into a variety of interior styles.

The insert can be built into a solid block or surrounded by decorative materials that reflect the room's furnishings. At the same time, the design should take into account ventilation and thermal protection requirements.

The final construction method of the enclosure should be adapted to the device documentation and the conditions in a specific building.

Heat-resistant ceramic glass

The insert uses heat-resistant ceramic glass suitable for operation at temperatures up to 800°CThe material retains its properties during proper use of the device and allows for safe observation of the flames.

The large glazing area allows for the combustion chamber to be fully exposed. This allows the insert to serve not only as an additional heat source but also as a decorative element of the interior design.

Clean the glass according to the instructions in the user manual. Do not use any cleaning agents or tools that could damage the glass or door seal.

Steel doors with a stable structure

The insert door is made of special steel profile, which ensures appropriate stiffness and resistance to high temperatures.

A stable structure is particularly important for wide, vertically opening glazing. It supports the correct positioning of the door and the proper adhesion of the seals during regular use.

At the same time, the limited number of visible structural elements means that the most important part of the front remains the view of the fireplace.

A system that helps keep the glass clean

The AL19G.HD fireplace insert is equipped with an air curtain that helps maintain the clean glass effectThe airflow directed along the inner surface of the glazing helps reduce the build-up of soot and other contaminants.

This allows the flames to remain visible for longer periods of time. However, the system does not eliminate the need for periodic cleaning of the glazing.

The degree of glass contamination is also influenced by wood moisture content, fuel quality, chimney draft parameters, lighting method, and air supply adjustment. Therefore, the device should be used in accordance with the manufacturer's instructions.

Power of the AL19G.HD fireplace insert

The nominal power of the AL19G.HD fireplace insert is 19 kWThe heating load ranges from 9.5 to 24 kW, allowing you to adjust the device's operating intensity to the current heat demand.

The selection of the insert should take into account, among other things, the cubic capacity of the rooms, the building insulation standard, the layout of the heated zones and the parameters of the chimney flue.

Therefore, choosing a device of this power should be consulted with a qualified installer. This reduces the risk of using an insert that is inappropriate for the building's conditions.

Thermal efficiency at the level of 81%

The thermal efficiency of the AL19G.HD model is 81%A properly designed air supply system supports stable combustion and the utilization of the energy contained in the wood.

The special design of the rear part of the body allows secondary air to be supplied to the upper part of the combustion chamber, supporting the post-combustion of gases generated during fuel combustion.

As a result, the combustion process can be more precise. However, achieving the declared parameters requires proper installation, proper chimney draft, and the use of properly seasoned wood.

Emission parameters of the AL19G.HD model

Pollen emissions at 13% O₂ totals 29 mg/m³. In turn, CO emissions at 13% O₂ totals 1200 mg/m³.

The declared values refer to specific device testing conditions. In an actual installation, combustion is influenced by factors such as wood quality, chimney draft, ignition method, and air supply regulation.

Therefore, use dry, properly seasoned wood and the amount of fuel specified in the user manual. This will reduce the risk of improper combustion and excessive contamination.

External air intake

The steel base of the device is equipped with external air intake damperThe air needed for combustion can thus be supplied directly from outside the building.

This solution reduces the need to draw air exclusively from the heated room. This is particularly important in modern buildings characterized by high airtightness.

The diameter of the intake port is 150 mmThe duct must be designed to ensure the free flow of the required amount of air into the combustion chamber.

Fireplace insert adapted for recuperation

The AL19G.HD model is adapted for use in buildings equipped with heat recoveryThe external air intake helps reduce the impact of the fireplace on the air balance inside the room.

At the same time, the fireplace installation and mechanical ventilation should be properly designed and adjusted to ensure proper operating conditions for both systems.

It's important to determine the air intake method before beginning construction. This helps avoid conflicts with other installations and properly prepare the air duct route.

Flue with a diameter of 220 mm

The diameter of the flue of the ALBERO AL19G.HD insert is 220 mmThe chimney and exhaust connection must be adapted to the parameters of the appliance.

Before installation, check, among other things, the cross-section and height of the chimney, the available draft, the method of connection and the possibility of performing periodic inspections and cleaning of the installation.

The final assessment of the connection conditions should be carried out by a qualified installer or a person with appropriate chimney qualifications.

Ventilated insert housing AL19G.HD

Model AL19G.HD it is not intended for the construction of warm buildingsThe enclosure should therefore be designed as an appropriately ventilated structure, in accordance with the device instructions and thermal protection requirements.

Air inlets and outlets should allow for free flow around the insert body. This allows heated air to be transferred to the room while protecting the housing components from excessive temperature rise.

The enclosure should be constructed using materials designed for use in elevated temperatures. The structure should also provide access to components requiring inspection or service.

Required active fields of the grids

The active area of the outlet grilles should be from 1330 to 1520 cm². However, the required active area of the inlet grilles is in the range of 760 to 1240 cm².

When selecting grilles, consider their actual active area, not just the external dimensions of the frame. Slats, mesh, and other structural elements limit the area available for airflow.

Intake vents draw cooler air into the space around the body. The heated air then moves upward and is expelled through the exhaust grilles.

Construction adapted to the guillotine mechanism

When designing the enclosure, ensure there is sufficient space for vertical lifting of wide doors. The design must not restrict the movement of the mechanism or cause pressure on the insert components.

Furthermore, access to parts requiring inspection and service must be maintained. Consideration must also be given to the space required for connecting the flue pipe, providing air intake, and venting.

The design and installation of the installation should be entrusted to a qualified installer who will take into account the current documentation of the device and the conditions existing in the specific building.

P265GH boiler steel body

The insert casing is made of P265GH grade boiler steel in accordance with EN 10028-2This material is intended for applications requiring operation at elevated temperatures.

The steel construction ensures the stability of the entire device. Furthermore, the carefully selected material ensures the insert's durability during regular use.

Proper operating conditions also depend on the installation and construction of the enclosure. Therefore, all work should be carried out in accordance with the current product documentation.

Personalization of the ALBERO AL19G.HD insert

The ALBERO series allows you to match selected elements of the device to the character of your interior. Customization options include the handle, grilles, and black concrete fireplace insert.

It is possible to order a cartridge with black powder-coated door handleThis gives the front a more uniform appearance and allows it to blend in better with dark furnishings.

The black lining of the combustion chamber creates a cohesive composition with the device's frame and highlights the color of the flames. As a result, the insert's appearance can be adapted to the specific design of the living room.

Dimensions of the AL19G.HD fireplace insert

The dimensions of the device are 1203 × 1324 × 590 mmThe width of the insert and the space required for the guillotine mechanism to operate must be carefully considered when designing the housing.

The weight of the model is 262 kgThe substrate should therefore have adequate load-bearing capacity and be prepared in accordance with the requirements for the installation of solid fuel heating devices.

Before constructing the enclosure, use a current technical drawing. This allows you to properly plan the device's positioning, the location of the flue pipe, the design of the air intake, and the arrangement of ventilation grilles.

Energy efficiency class A+

The AL19G.HD fireplace insert has energy efficiency class A+81% thermal efficiency and a secondary air supply system support the use of energy contained in the wood.

However, the actual operating efficiency also depends on the quality of the fuel, the parameters of the chimney, the method of installation and the correct operation of the device.

Compliance with Ecodesign, BImSchV II and 15a B-VG

The ALBERO AL19G.HD fireplace insert meets the requirements Ekoprojekt, BImSchV II and 15a B-VG.

The requirements for local solid fuel space heaters are specified, among others, by: Commission Regulation (EU) 2015/1185.

In accordance with Ecodesign requirements, this product cannot be used as a primary heating source. It should be used as a supplementary heat source, in accordance with its intended use and the device's instructions.

Why choose the AL19G.HD fireplace insert?

AL19G.HD fireplace insert It combines a nominal power of 19 kW, a 900 mm wide panoramic glass, and a vertically lifting door. The guillotine mechanism provides convenient access to the combustion chamber while maintaining a modern design.

Additionally, the model is equipped with an external air intake, an exhaust afterburner system, and an air curtain to help keep the glass clean. The ability to personalize the handle, grilles, and firebox lining makes it easy to match the insert to your specific interior design.