ALBERO AL11G.VD

Vertical fireplace insert with guillotine ALBERO AL11G.VD

Vertical fireplace insert with guillotine ALBERO AL11G.VD This steel model has a nominal power of 11 kW, is equipped with a high front glass panel and a vertically lifting door. Its slender proportions allow for the creation of a modern design in which the central element is the expansive view of the fire.

The heating load ranges from 5.5 to 14 kW. This allows the device's operating intensity to be adjusted to current heating requirements. At the same time, the guillotine mechanism provides convenient access to the combustion chamber when adding wood.

The model is one of the popular ones ALBERO fireplace insert seriesThe line features customizable appearance, a system that helps keep the glass clean, and is suitable for buildings equipped with heat recovery systems.

Vertical vision of fire

The ALBERO AL11G.VD was designed for built-in fireplaces where a slim, vertical form is essential. The high glazing allows for excellent exposure of the flames while simultaneously limiting the overall width of the structure.

The glass dimensions provided by the manufacturer are: 590 × 430 mmHowever, before installing the unit, you should use a current technical drawing, as the width and height markings should correspond to the documentation for the specific unit.

The simple glazing arrangement makes it easy to fit the insert into both minimalist interiors and more complex living room arrangements.

Vertically lifting guillotine type doors

The most important distinguishing feature of the AL11G.VD model is doors that lift vertically upwardsThe guillotine mechanism provides convenient access to the firebox and, when opening, does not require the space required to swing out a traditional door.

This allows the insert to be used in spaces with limited space. At the same time, the vertical opening emphasizes the modern character of the device.

The door is made of a special steel profile ensuring appropriate stiffness and resistance to high temperatures.

Ceramic glass resistant to 800°C

The doors are equipped with heat-resistant ceramic glass suitable for operation at temperatures up to 800°CThe material allows for safe observation of flames and retains its properties during proper operation of the device.

Additionally, the insert is equipped with an air curtain. Air flow is directed along the inner surface of the glass, helping to reduce the buildup of soot and other contaminants.

As a result, the glazing can remain transparent for a longer period of time. However, the system's effectiveness also depends on wood moisture content, chimney parameters, lighting method, and air supply settings.

Nominal power 11 kW

The nominal power of the ALBERO AL11G.VD insert is 11 kWThe heating load ranges from 5.5 to 14 kW, allowing you to adjust the combustion intensity depending on your current needs.

The device can act as an additional heat source in the living room, open-plan living area or other room intended for the installation of a wood-burning fireplace.

Selecting the appropriate power should take into account, among other factors, the cubic capacity of the room, the building's insulation standard, the interior layout, and the parameters of the chimney flue. Therefore, it's worth consulting a qualified installer before selecting a device.

Thermal efficiency at the level of 84%

The thermal efficiency of the AL11G.VD model is 84%The air supply system supports stable combustion and the use of the energy contained in the wood.

The specially designed rear section of the body allows secondary air to be supplied to the upper part of the combustion chamber, thus enabling the post-combustion of gases generated during fuel combustion.

As a result, the process can proceed more precisely, which helps reduce the amount of incomplete combustion products and maintain high efficiency of the device.

AL11G.VD emission parameters

Pollen emissions at 13% O₂ totals 31 mg/m³. In turn, CO emissions at 13% O₂ totals 1205 mg/m³.

Obtaining the declared parameters requires correct installation, ensuring appropriate chimney draft and the use of properly seasoned wood.

Furthermore, the device should be operated in accordance with the manufacturer's instructions, especially in terms of the amount of fuel, the method of ignition and the regulation of air supplied to the combustion chamber.

External air intake

The steel base of the insert is equipped with external air intake damperThe air needed for combustion can thus be supplied directly from outside the building.

This solution reduces the need to draw air from the heated room. This is particularly important in modern, highly airtight buildings.

The intake port diameter is 125 mm. The intake duct should be designed to ensure the free flow of the appropriate amount of air.

A fireplace insert for a house with heat recovery

The AL11G.VD model is adapted for use in buildings equipped with heat recoveryThe external air intake helps reduce the impact of the fireplace on the air balance in the room.

At the same time, the fireplace installation and mechanical ventilation should be properly designed and adjusted. This will ensure proper operating conditions for both systems.

It's best to determine the air supply method before commencing construction. This helps avoid conflicts with other installations and maintain the required installation distances.

Exhaust gas discharge through a 200 mm flue

The diameter of the AL11G.VD insert flue is 200 mmThe chimney and exhaust connection must be adapted to the parameters of the appliance.

Before installation, check, among other things, the cross-section and height of the chimney, the available draft, the method of connection and the possibility of carrying out periodic inspections and cleaning of the installation.

The final assessment of the possibility of connecting the device should be performed by a qualified installer or a person with appropriate chimney qualifications.

Ventilated fireplace enclosure

Model AL11G.VD it is not intended for the construction of warm buildingsThe enclosure must therefore be designed as an appropriately ventilated structure, in accordance with the device instructions and thermal protection requirements.

The active area of the outlet grilles should be from 770 to 880 cm². The active area of the inlet grilles should be in the range of 440 to 720 cm².

Properly placed openings allow air to flow around the body, effectively transferring heat to the interior and protecting the built-in components from excessive temperature rise.

Construction adapted to the guillotine mechanism

When designing the enclosure, consider the height of the insert and the space required for the door lifting mechanism. The enclosure design must not restrict the movement of the guillotine components or access to parts requiring service inspection.

In addition, you need to provide space for connecting the flue pipe, providing an air intake and correctly positioning the ventilation grilles.

Design and installation should be entrusted to a qualified installer who will take into account the requirements of the specific device and the conditions in the building.

P265GH boiler steel body

The insert casing is made of P265GH boiler steel grade compliant with EN 10028-2This material is intended for applications requiring operation at elevated temperatures.

The steel frame ensures the stability of the entire structure. At the same time, the properly constructed door maintains the required rigidity when the glazing is raised and lowered.

Personalization ALBERO AL11G.VD

The ALBERO series allows you to match selected insert elements to the character of your interior. Customization options include a handle, grilles, and a black concrete fireplace insert.

It is possible to order the device with black powder-coated door handleThis allows for a more uniform appearance of the front and allows it to match dark cabinetry.

The black lining of the combustion chamber creates a cohesive composition with the insert frame and highlights the color of the flames. This allows the device's appearance to be adapted to the specific design of the living room.

Dimensions and weight of the AL11G.VD insert

The dimensions of the device are 733 × 1551 × 585 mmThe significant height of the structure is due, among other things, to the use of vertical glazing and the door lifting mechanism.

The weight of the insert is 183 kgTherefore, the substrate should have adequate load-bearing capacity and be prepared in accordance with the requirements for the installation of heating devices.

Before constructing the enclosure, use current dimensional documentation. This will allow you to properly plan the insert's positioning, leveling, and connecting all utilities.

Energy efficiency class A+

ALBERO AL11G.VD has energy efficiency class A+84% efficiency and a gas combustion system support the efficient use of energy contained in wood.

However, actual operating efficiency also depends on the quality of the fuel, chimney parameters, installation method and correct operation of the device.

Compliance with Ecodesign, BImSchV II and 15a B-VG

The vertical fireplace insert with guillotine ALBERO AL11G.VD meets the requirements Ekoprojekt, BImSchV II and 15a B-VG.

The requirements for local solid fuel space heaters are specified, among others, by: Commission Regulation (EU) 2015/1185.

In accordance with Ecodesign requirements, this product cannot be used as a primary heating source. It should be used as a supplementary heat source, in accordance with its intended use and the device's instructions.

Why choose ALBERO AL11G.VD?

Vertical fireplace insert with guillotine ALBERO AL11G.VD combines a nominal power of 11 kW, 84% efficiency, and a high view of the fire. The vertically lifting door provides convenient access to the firebox while maintaining a modern design.

Additionally, the device is equipped with an external air intake, an exhaust afterburner system, and a curtain to help keep the glass clean. The ability to personalize the handle, grilles, and fireplace insert makes it easy to match the model to your specific interior design.